Improve the Efficiency of Tricone Drill Bit

The tricone drill bit is a device specially used in petroleum drilling engineering. Such petroleum drill bits types can cut the underground rock through the cutting wheel and break it through the cone to achieve downward drilling. Suppose you ignore it during the drilling process. In that case, it will easily cause damage, directly affecting the progress and efficiency of the entire drilling project.

Ⅰ. How to improve the efficiency of tricone drill bits

In order to improve the efficiency of the use of tricone drill bits, operators are required to follow the relevant procedures during the drilling process strictly. Suppose there is a jump or stuck drill in the middle. In that case, corresponding response measures should be taken immediately. The cause should be found in time and eliminated. If the depth is not deep, lift the drill bit in time and check the drill bit to see any damage. When you need to change the bit, the new roller bit must be run-in first, and then it can be steadily pressurized after the run-in. In addition, it is necessary to pay attention to the water injection pressure in the drilling process in time. Increasing the water injection pressure can increase the drilling efficiency of the tricone drill bit and can bring out some gravel particles in time.

Ⅱ. How to reduce the damage of the tricone drill bits

We need to pay attention to maintaining it. At the same time, it can be operated and used correctly to appropriately reduce the damage rate of the tri-cone bit and improve work efficiency.

During installation and disassembly, you need to use professional tools to prevent all kinds of metal objects from directly touching their cutting teeth, and then check the water eye of the tricone drill bit. The water eye is not blocked, ensuring the smooth flow of high-pressure water. If the water eye is clean and free of any foreign matter, the high-pressure nozzle can be installed bypassing. The service life can be extended only when the nozzle can be used normally.

The quality of drilling, the efficiency of drilling, and the cost of drilling are all affected. Therefore, choosing and using the right cone bit is very important. As one of the most professional tricone bits manufacturers, GREAT provides high-quality tricone drill bits. Contact us now to get more information!